2.7 CEU Class 1 WT/WD (WTER-1219)

In this five-day course students will learn basic math, water sampling, water testing procedures, ground and surface water treatment, distribution system hydraulics and components, backflow and cross-connection control, disinfection, pumps, and operator safety. Students will write the Class 1 provincial certification exams to meet the requirements of the Saskatchewan Operator Certification Board.
For more information, please contact Flexible.Learning@saskpolytech.ca
Start and End DatesFee LocationPIC
October 7, 2019 - October 11, 2019

Monday - Friday, 8:30am - 4:30pm


Registration Deadline: September 30, 2019
Register
$1,125.00Moose Jaw (Lecture/Theory)WTER-1219-1
December 2, 2019 - December 6, 2019

Monday - Friday, 8:30am - 4:30pm


Registration Deadline: November 25, 2019
Register
$1,125.00Regina (Lecture/Theory)WTER-1219-2
February 24, 2020 - February 28, 2020

Monday - Friday, 8:30am - 4:30pm


Registration Deadline: February 17, 2020
Register
$1,125.00Prince Albert (Lecture/Theory)WTER-1219-3
March 23, 2020 - March 27, 2020

Monday - Friday, 8:00am - 3:30pm


Registration Deadline: March 16, 2020
Register
$1,125.00Saskatoon (Lecture/Theory)WTER-1219-4
Saskatchewan Polytechnic reserves the right to revise or cancel programs or make other changes as Saskatchewan Polytechnic deems necessary at any time.

You may also be interested in...

2.7 CEU Class 1 WWT/WWC
2.5 CEU Class 1 WT/WD
1.8 CEU Class 2 WT/WD
1.8 CEU Class 3 WT/WD
2.5 CEU Class 1 WWT/WWC

 

INTERNATIONAL STUDENTS: Please note that if you are an international student studying at Saskatchewan Polytechnic on a student visa (study permit), you will be charged the full international student tuition rate for this course. The tuition charged during this course registration process will be supplemented with an additional international student tuition fee that will be charged directly to your account with Saskatchewan Polytechnic. Thank you.