Successfully completed courses from ATL program (from 2018) may be eligible for credit to AU applicable programs.

Students enrolled in or have completed this program may enter directly into the BA in Adult Education or associated programs for a total of 24 credits.

Graduates of this program may be eligible to receive 30 block credits and 3 credits each for ENGL 255, COMP 210, ARCH 200 and APST 230 for a total of 42 credit units toward a Bachelor of Science-Architecture Post Diploma.

Graduates of this program may be eligible for block transfer into Bachelor of Technology Degree with 39 credit hours (13 courses) to be completed, including a technical project and report

Graduates of this program (Interior Design specialization) may receive up to 84 transfer credits (2018 Sask Polytech curriculum) or up to 81 transfer credits (2016 Sask Polytech curriculum) in the Bachelor of Interior Design degree program.

Students who have graduated from the Lethbridge College Civil Engineering Technology, Engineering Design and Drafting Technology or Geomatics Engineering Technology diploma after June 30, 2018 and completed required bridging courses may be admitted as 3rd year degree level to the SaskPolytech Bachelor of Construction Management program.

Students who have graduated from the NBCC Environmental Technology diploma may be admitted to the third year of the Sask Polytech BCM degree program. Accepted NBCC graduates must complete a required 3-credit surveying course prior to BCM graduation.

Graduates having completed the Advanced Diploma in Hospitality and Tourism Management and the Higher Diploma in Hospitality and Tourism Management at LSBF (London School of Business and Finance) as having met the requirements for admission to year three of the BAMgt (Bachelor of Applied Management) program at Sask Polytech.

Graduates may be eligible for transfer of courses from the Sask Polytech Business Certificate program on an individualized basis depending on the AU program selected.  

Students from the Sask Polytech Business Certificate program who have successfully completed specific courses within the past five years will be assigned transfer credit from Briercrest College and Seminary as detailed in the Articulation Agreement.

Students from Sask Polytech to CITT, or students from CITT to Sask Polytech, may be eligible for credit of courses.

Students from Sask Polytech may be eligible for transfer of courses.

Graduates from the Business certificate program may be eligible for a maximum of 30 credit hours towards the Bachelor of Business Administration. A grade of 60% or more must be achieved in courses for which graduates are seeking transfer credit. Graduates must maintain a minimum PGPA of 65% in the Business certificate program.

Completion of SaskPolytech Business Certificate program may be eligible for a block transfer of 30 credit units towards the Edwards School of Business Bachelor of Commerce degree.

Graduates who have completed the specified program at Sask Polytech may receive 30-60 block credits towards one of the following programs at Athabasca University: Bachelor of Commerce (PD), Bachelor of Commerce with Major (PD), Bachelor of Management 3 Yr (PD), Bachelor of Human Resources Labour Relations (PD).

Students from Sask Polytech may be eligible for transfer of courses.

Students from Sask Polytech to CITT, or students from CITT to Sask Polytech, may be eligible for credit of courses

Graduates of this program with minimum "B" (3.00/4.33) GPA may be eligible for full block transfer into third year Bachelor of Business Administration in Sustainability and International Business program.

Graduates of this program with minimum "B" (3.00/4.33) GPA may be eligible for full block transfer into third year Bachelor of Commerce in Entrepreneurial Management program.

Diploma graduates will receive two years of block credit and can complete a Bachelor of Management in two years. Will consider applicants below 3.0 (on a 4 point scale) for admission, depending on individual circumstances.

Graduates from the Business diploma program may be eligible for a maximum of 60 credit hours towards the Bachelor of Business Administration. A grade of 60% or more must be achieved in courses for which graduates are seeking transfer credit. Graduates must maintain a minimum PGPA of 65% in the Business diploma program.
View the current Transfer Credit Agreement with the Paul J. Hill School of Business.

Completion of SaskPolytech Business Diploma Accountancy program may be eligible for a block transfer of 60 credit units towards the Edwards School of Business Bachelor of Commerce degree.

Completion of SaskPolytech Business Diploma Human Resources program may be eligible for a block transfer of 60 credit units towards the Edwards School of Business Bachelor of Commerce degree.

 Completion of SaskPolytech Business Diploma Management program may be eligible for a block transfer of 60 credit units towards the Edwards School of Business Bachelor of Commerce degree.

Completion of SaskPolytech Business Diploma Marketing program may be eligible for a block transfer of 60 credit units towards the Edwards School of Business Bachelor of Commerce degree.

Graduates of this program may be eligible for block transfer of 60 credit units into the Bachelor of Science Post Diploma program or 30 credit units toward BSc (PD) with Majors in Applied Mathematics, Computing Information Systems and/or Human Science.

Graduates of this program may be eligible for block transfer of 60 credit units into the Bachelor of Science Post Diploma program or 30 credit units toward BSc (PD) with Majors in Applied Mathematics, Computing Information Systems and/or Human Science.

Graduates of this program is granted a maximum of 69 transfer credits into the Bachelor of Health Science.

Graduates of this program may be eligible for block transfer of 60 credit units into the Bachelor of Science Post Diploma program or 30 credit units toward BSc (PD) with Majors in Applied Mathematics, Computing Information Systems and/or Human Science.

Graduates of this program is granted a maximum of 69 transfer credits into the Bachelor of Health Science.

Graduates of this program may be eligible for block transfer of 60 credit units into the Bachelor of Science Post Diploma program or 30 credit units toward BSc (PD) with Majors in Applied Mathematics, Computing Information Systems and/or Human Science.

Graduates of this program is granted a maximum of 84 transfer credits into the Bachelor of Health Science.

Graduates of this program may be accepted in to the Faculty of Arts or the Faculty of Kinesiology and Health Studies at the University of Regina or the First Nations University of Canada with 60 credit hours of block transfer.

Graduates of this program may be eligible for block transfer of 36 credit units toward a Bachelor of Health Administration Post Diploma degree program.

Graduates of this program is granted a maximum of 60 transfer credits into the Bachelor of Health Science.

Graduates of this program with a 70% GPA may earn credit in the Bachelor of Health Administration.

Graduates of this program may be eligible for block transfer of 60 credit units into the Bachelor of Science Post Diploma program or 30 credit units toward BSc (PD) with Majors in Applied Mathematics, Computing Information Systems and/or Human Science.

Graduates of this program is granted a maximum of 72 transfer credits into the Bachelor of Health Science.

Graduates of this program may be eligible for block transfer into third year of Bachelor of Medical Laboratory Science.

Graduates of this program may be eligible for block transfer of 60 credit units into the Bachelor of Science Post Diploma program or 30 credit units toward BSc (PD) with Majors in Applied Mathematics, Computing Information Systems and/or Human Science.

Graduates of this program is granted a maximum of 69 transfer credits into the Bachelor of Health Science.

Graduates of this program may be eligible to enter the third year of the 4-year Bachelor of Medical Imaging program.

May be eligible for block transfer, with a min GPA of 2.0, into the third year of the Bachelor of Applied Arts in Justice Studies. Students must complete Criminology-CJP 2278 prior to entering third year of the BAAJS program.

Graduates of this program is granted a maximum of 69 transfer credits into the Bachelor of Health Science. 

Graduates of this program may qualify for admission into the Post-Diploma Bachelor of Health Sciences Degree program in Addictions Counselling for completion of their Bachelor of Health Sciences degree.

Graduates from this program may be eligible for 60 credit units into Bachelor of Professional Arts - Human Services Major.

Graduates of this program is granted a maximum of 48 transfer credits into the Bachelor of Health Science.

Students who complete their two-year diploma in Therapeutic Recreation at Saskatchewan Polytechnic may be admitted into the University of Lethbridge's Bachelor of Therapeutic Recreation degree program for completion of their Bachelor of Therapeutic Recreation degree.

Block Transfer of 60 credit units into the Bachelor of Sport and Recreation Studies - Therapeutic Recreation Major

Graduates of this program with minimum 2.50 GPA may be admitted into the Post-Diploma B.Sc. (Agricultural Studies) or Post-Diploma B.A. (Agricultural Studies) at the University of Lethbridge. If admitted, the graduate will be 3rd year degree level student in the Faculty of Arts and Sciences.  

Graduates of this program may be eligible for block transfer of 60 credit units into the Bachelor of Science Post Diploma program or 30 credit units toward BSc (PD) with Majors in Applied Mathematics, Computing Information Systems and/or Human Science.

Graduates of this program may be granted 60 credit hours towards their journeyperson status.

Graduates who have completed the specified program at Sask Polytech may receive 30-60 block credits towards one of the following programs at Athabasca University: Bachelor of Commerce (PD), Bachelor of Commerce with Major (PD), Bachelor of Management 3 Yr (PD), Bachelor of Human Resources Labour Relations (PD).

Graduates of this program with minimum B (3.0/4.33) GPA may be eligible for a full block transfer into the third year of the Bachelor of Arts in International Hotel Management program.

Graduates who have completed the specified program at Sask Polytech may receive 30-60 block credits towards one of the following programs at Athabasca University: Bachelor of Commerce (PD), Bachelor of Commerce with Major (PD), Bachelor of Management 3 Yr (PD), Bachelor of Human Resources Labour Relations (PD).

Royal Roads University agrees to facilitate the block transfer of student(s) from SaskPolytech with appropriate prerequisite qualifications into the third year of the Bachelor of Arts in Global Tourism Management degree.

Block Transfer of 60 credit units into the Bachelor of Sport and Recreation Studies - Sport and Recreation Management Major.

Sask Polytech graduates with 2.33 GPA, (including 6 credits of first year university-transferable English or Communications courses with a minimum grade of C) may be admitted directly into the third year of the Langara College Bachelor of Recreation Management Degree program (BRM)

Graduates of this program may be granted academic acceptance into the Criminal Justice – Policing Diploma, providing other prerequisite qualifications are met. They may receive up to 33 credit units on a course by course basis, as outlined in the agreement.

Graduates of this program, with a minimum average of 68% and no grade below 60%, may be eligible to receive 21 credit hours of block transfer to the Bachelor of Human Justice or Bachelor of Arts, Police Studies.

Graduates of this program with min GPA of 2.0 may be eligible for admission into the third year of the Bachelor of Applied Arts in Justice Studies.

Royal Roads University agrees to facilitate the block transfer of student(s) from SaskPolytech with appropriate prerequisite qualifications into the third year of the Bachelor of Arts in Justice Studies.

Graduates of this program may receive 30 hours of block transfer to the Bachelor of Human Justice or Bachelor of Arts in Police Studies.

Sask Polytech OHS graduates admitted to National Construction Safety Offices (NCSO) may be recognized for up to 50% of the program requirements for NSO certification; certified NCSOs admitted to Sask Polytech OHS program may apply for PLAR credit.

30 credit units may be granted toward Bachelor of Professional Arts-Human Services (BPA-HRSV). Students are required to present an additional 30 university level credits prior to admittance into the BPA-HSRV program.

60 credit units may be granted toward Bachelor of Professional Arts-Human Services (BPA-HRSV) 

May be eligible for block transfer, with a min GPA of 2.0, into the third year of the Bachelor of Applied Arts in Justice Studies. Students must complete Criminology-CJP 2278 prior to entering third year of the BAAJS program.

Graduates of this program may be eligible for block transfer of 60 credit units towards the Bachelor of Management, Bachelor of Commerce, or Bachelor of Human Resources & Labour Relations Post Diploma programs.

Graduates who have completed the specified program at Sask Polytech may receive 30-60 block credits towards one of the following programs at Athabasca University: Bachelor of Commerce (PD), Bachelor of Commerce with Major (PD), Bachelor of Management 3 Yr (PD), Bachelor of Human Resources Labour Relations (PD).

Graduates of this program with minimum 2.50 GPA may be admitted into the Post-Diploma B.Sc. (Computer Science) at the University of Lethbridge. If admitted, the graduate will be 3rd year degree level student in the Faculty of Arts and Sciences.

Graduates of this program may be granted a block transfer of 54 credit units, into the University of Saskatchewan Arts & Science undergraduate degree programs, for further study in Computer Science.

Graduates of LIT may be eligible for block transfer of 60 credit units into the Bachelor of Professional Arts with Majors in Communication Studies, Human Services, Governance, Law & Management, and/or Criminal Justice.

Graduates of this program may be eligible for block transfer of 60 credit units into the Bachelor of Science Post Diploma program or 30 credit units toward BSc (PD) with Majors in Applied Mathematics, Computing Information Systems and/or Human Science. 

Graduates of the Chemical Technology Diploma may be eligible for 36 cu in the Bachelor of Engineering Technology Chemical, Environmental Studies or Petroleum degree programs

Graduates of this program may obtain advanced standing toward a degree in engineering.

Learn more about the agreement at Lakehead University.

Graduates of this program may be eligible for block transfer into Bachelor of Technology Degree with 39 credit hours (13 courses) to be completed, including a technical project and report

Graduates of this program with a minimum Cumulative GPA of 3.0 (75%) may qualify for admission to Queen's University's BTech (Mining) Degree Program. Block transfer of 72 units less the required Customized Bridge Course units will be granted upon admission. Students must pass each prescribed bridge course with a minimum C- in order to progress to Year 3 of the BTech (Mining) Program.

Graduates of this program may be eligible for full block transfer into the third year of the BSc in Environmental Science. 

Graduates of this program with a minimum average of 60% may enroll in the third year of the four-year Chemical Technology Degree program offered through the Faculty of Science.

Graduates of this program may be granted a block transfer of 60 credit units into the College of Arts & Science

Graduates of Computer Engineering Technology may be eligible for block transfer of 60 credit units into the Bachelor of Science Post Diploma program or 30 credit units toward BSc (PD) with Majors in Applied Mathematics, Computing Information Systems and/or Human Science.

Graduates of this program may obtain advanced standing toward a degree in engineering. 

Learn more about the agreement at Lakehead University.

Graduates of this program may be eligible for block transfer into Bachelor of Technology Degree with 39 credit hours (13 courses) to be completed, including a technical project and report

Graduates of this program with a minimum Cumulative GPA of 3.0 (75%) may qualify for admission to Queen's University's BTech (Mining) Degree Program. Block transfer of 72 units less the required Customized Bridge Course units will be granted upon admission. Students must pass each prescribed bridge course with a minimum C- in order to progress to Year 3 of the BTech (Mining) Program.

Graduates of the CAD/CAM Engineering Technology Diplomas may be eligible for 30 cu in the Bachelor of Engineering Technology Manufacturing degree program 

Graduates of this program may obtain advanced standing toward a degree in engineering.

Learn more about the agreement at Lakehead University.

Graduates of this program may be eligible for block transfer into Bachelor of Technology Degree with 39 credit hours (13 courses) to be completed, including a technical project and report

Graduates of this program with a minimum Cumulative GPA of 3.0 (75%) may qualify for admission to Queen's University's BTech (Mining) Degree Program. Block transfer of 72 units less the required Customized Bridge Course units will be granted upon admission. Students must pass each prescribed bridge course with a minimum C- in order to progress to Year 3 of the BTech (Mining) Program.

Graduates of the Electrical Engineering Technology Diploma may be eligible for 30 cu in the Bachelor of Engineering Technology Manufacturing degree program, or 36 cu in the Bachelor of Engineering Technology Bio-Medical, Electronics and Controls, or Petroleum degree programs 

Graduates of this program may obtain advanced standing toward a degree in engineering.

Learn more about the agreement at Lakehead University.

Graduates of this program may be eligible for block transfer into Bachelor of Technology Degree with 39 credit hours (13 courses) to be completed, including a technical project and report

Graduates of this program with a minimum Cumulative GPA of 3.0 (75%) may qualify for admission to Queen's University's BTech (Mining) Degree Program. Block transfer of 72 units less the required Customized Bridge Course units will be granted upon admission. Students must pass each prescribed bridge course with a minimum C- in order to progress to Year 3 of the BTech (Mining) Program.

Graduates of the Electronic Systems Engineering Technology Diploma may be eligible for 30 cu in the Bachelor of Engineering Technology Manufacturing degree program, or 36 cu in the Bachelor of Engineering Technology Bio-Medical, Electronics and Controls, or Petroleum degree programs 

Graduates of this program may obtain advanced standing toward a degree in engineering.

Learn more about the agreement at Lakehead University.

Graduates of this program may be eligible for block transfer into Bachelor of Technology Degree with 39 credit hours (13 courses) to be completed, including a technical project and report

Graduates of this program with a minimum Cumulative GPA of 3.0 (75%) may qualify for admission to Queen's University's BTech (Mining) Degree Program. Block transfer of 72 units less the required Customized Bridge Course units will be granted upon admission. Students must pass each prescribed bridge course with a minimum C- in order to progress to Year 3 of the BTech (Mining) Program.

Graduates of the Engineering Design and Drafting Technology Diploma may be eligible for 30 cu in the Bachelor of Engineering Technology Manufacturing degree program, or 36 cu in the Bachelor of Engineering Technology Petroleum degree programs 

Graduates of this program may be eligible for block transfer into Bachelor of Technology Degree with 39 credit hours (13 courses) to be completed, including a technical project and report

Graduates of this program with a minimum Cumulative GPA of 3.0 (75%) may qualify for admission to Queen's University's BTech (Mining) Degree Program. Block transfer of 72 units less the required Customized Bridge Course units will be granted upon admission. Students must pass each prescribed bridge course with a minimum C- in order to progress to Year 3 of the BTech (Mining) Program.

Graduates of the Instrumentation Engineering Technology Diploma may be eligible for 30 cu in the Bachelor of Engineering Technology Manufacturing degree program, or 36 cu in the Bachelor of Engineering Technology Bio-Medical, Electronics and Controls, or Petroleum degree programs 

Graduates of this program may be eligible for block transfer into Bachelor of Technology Degree with 39 credit hours (13 courses) to be completed, including a technical project and report

Graduates of this program with a minimum Cumulative GPA of 3.0 (75%) may qualify for admission to Queen's University's BTech (Mining) Degree Program. Block transfer of 72 units less the required Customized Bridge Course units will be granted upon admission. Students must pass each prescribed bridge course with a minimum C- in order to progress to Year 3 of the BTech (Mining) Program.

Graduates of the Mechanical Engineering Technology Diploma may be eligible for 30 cu in the Bachelor of Engineering Technology Manufacturing degree program, or 36 cu in the Bachelor of Engineering Technology Petroleum degree programs 

Graduates of this program may obtain advanced standing toward a degree in engineering.

Learn more about the agreement at Lakehead University.

Graduates of this program may be eligible for block transfer into Bachelor of Technology Degree with 39 credit hours (13 courses) to be completed, including a technical project and report

Graduates of this program with a minimum Cumulative GPA of 3.0 (75%) may qualify for admission to Queen's University's BTech (Mining) Degree Program. Block transfer of 72 units less the required Customized Bridge Course units will be granted upon admission. Students must pass each prescribed bridge course with a minimum C- in order to progress to Year 3 of the BTech (Mining) Program.

Graduates of the Mining Engineering Technology Diploma may be eligible for 36 cu in the Bachelor of Engineering Technology Environmental Studies or Petroleum degree programs

Graduates of this program with a minimum Cumulative GPA of 3.0 (75%) may qualify for admission to Queen's University's BTech (Mining) Degree Program. Block transfer of 72 units less the required Customized Bridge Course units will be granted upon admission. Students must pass each prescribed bridge course with a minimum C- in order to progress to Year 3 of the BTech (Mining) Program.

Graduates of this program may be eligible for block transfer into Bachelor of Technology Degree with 39 credit hours (13 courses) to be completed, including a technical project and report.

Graduates of this program with a minimum Cumulative GPA of 3.0 (75%) may qualify for admission to Queen's University's BTech (Mining) Degree Program. Block transfer of 72 units less the required Customized Bridge Course units will be granted upon admission. Students must pass each prescribed bridge course with a minimum C- in order to progress to Year 3 of the BTech (Mining) Program. 

Graduates of this program may be eligible for block transfer of 60 credit units into the Bachelor of Science Post Diploma program or 30 credit units toward BSc (PD) with Majors in Applied Mathematics, Computing Information Systems and/or Human Science. 

Graduates of the BioScience Technology Diploma may be eligible for 36 cu in the Bachelor of Engineering Technology Chemical or Environmental studies degree programs

Graduates of this program may be eligible for block transfer into Bachelor of Technology Degree with 39 credit hours (13 courses) to be completed, including a technical project and report

Royal Roads University agrees to facilitate full block transfer of student(s) from Sask Polytech with appropriate prerequisite qualifications into BS Environmental Science, BS Environmental Practice, and BA Environmetal Practice.

Graduates of this program may be granted advanced credit standing comprised of a block transfer of 60 credit units into the College of Arts & Science, Bachelor of Science Four-year, or Honours Biology undergraduate degree program.

Graduates of the Water resources Engineering Technology Diploma may be eligible for 36 cu in the Bachelor of Engineering Technology Environmental Studies or Petroleum degree programs 

Graduates of this program may obtain advanced standing toward a degree in engineering.

Learn more about the agreement at Lakehead University.

Graduates of this program may be eligible for admission to Lakeland College's Bachelor of Applied Science: Environmental Management (BAppSc) Degree program. 

Graduates of this program may be eligible for block transfer into Bachelor of Technology Degree with 39 credit hours (13 courses) to be completed, including a technical project and report

Graduates of this program with a minimum Cumulative GPA of 3.0 (75%) may qualify for admission to Queen's University's BTech (Mining) Degree Program. Block transfer of 72 units less the required Customized Bridge Course units will be granted upon admission. Students must pass each prescribed bridge course with a minimum C- in order to progress to Year 3 of the BTech (Mining) Program.

Royal Roads University agrees to facilitate full block transfer of student(s) from Sask Polytech with appropriate prerequisite qualifications into BS Environmental Science, BS Environmental Practice, and BA Environmental Practice.

Graduates of the Environmental Engineering Technology Diploma may be eligible for 36 cu in the Bachelor of Engineering Technology Environmental Studies or Petroleum degree programs 

Graduates of this program may be eligible for admission to Lakeland College's Bachelor of Applied Science: Environmental Management (BAppSc) Degree program.

Graduates of this program may be eligible for block transfer into Bachelor of Technology Degree with 39 credit hours (13 courses) to be completed, including a technical project and report

Royal Roads University agrees to facilitate full block transfer of student(s) from SaskPolytech with appropriate prerequisite qualifications into BS Environmental Science, BS Environmental Practice, and BA Environmetal Practice

The Bachelor of Geographic Information Science (B.GISc) is an innovative program offered by the Department of Geography & Environmental Studies at the University of Regina. Students who complete a 1-year certificate or 2-year diploma program in GIS/Geomatics from a recognized college (e.g. Saskatchewan Polytechnic) will be given 30 hours of transfer credits at the University of Regina and may enter directly into the 2nd year of the U of R Geography program. Upon successful completion of the program, students will be awarded the B.GISc degree from the University of Regina. The Bachelor of Geographic Information Science is a unique designation that is not offered anywhere else in North America.

Learn more about the Bachelor of Geographic Information Science (B.GISc) program at the University of Regina.

Graduates of this program may be eligible for admission to Lakeland College's Bachelor of Applied Science: Environmental Management (BAppSc) Degree program. 

Royal Roads University agrees to facilitate full block transfer of student(s) from Sask Polytech with appropriate prerequisite qualifications into BS Environmental Science, BS Environmental Practice, and BA Environmental Practice

Graduates of this program may be granted 60 hours of block transfer credit towards the BSc and BSc Honours in Environmental Biology.

Graduates having completed a maximum of 60 credit hours from the Integrated Resource Management diploma program at Sask Polytech with a minimum GPA of 60% may be admitted into the Bachelor of Arts in Resource and Environmental Studies at the University of Regina and First Nations University of Canada.

Royal Roads University agrees to facilitate full block transfer of student(s) from SaskPolytech with appropriate prerequisite qualifications into BS Environmental Practice, and BA Environmetal Practice.

Graduates having completed a maximum of 60 credit hours from the Resource and Environmental Law diploma program at Sask Polytech with a minimum GPA of 60% may be admitted into the Bachelor of Arts in Resource and Environmental Studies at the University of Regina and First Nations University of Canada.

Sask Polytech graduates after April 2019 onward with 2.33 GPA (C+) may be eligible for block transfer into Bachelor of Natural Resource Protection (BNRP) Degree program. Accepted Sask Polytech REL graduates must complete the 60 credits of course requirements for a BNRP degree.

Graduates of the Critical Care Nursing Advanced Certificate may be eligible for credit for NURS 326(3) and NURS 3XX (3) in the Bachelor of Nursing Post RN program.