Menu
Continuing Education Programs and Courses

Mining, Energy and Manufacturing Non-Credit Courses


WHMIS is a uniform, national regulatory system to inform about hazardous material (legally called “Controlled Products”). This course will enable participants to understand the intent of WHMIS symbols, labels and procedures for filling out MSDS (Material Safety Data Sheets) in places of employment. Participants will be trained on recognition and safe handling as well as use and storage of controlled products used at the workplace.

(GST & manual included), 4 hours
CRNStart and End DatesFeeLocation
CRN: 201404-1277May 11, 2015
Mon - 4:00-7:59 pm
Registration Deadline: May 11, 2015
Register Online
$90.00Saskatoon
CRN: 201501-45July 6, 2015
Mon - 8:00-11:59 am
Registration opens July 2, 2015
Registration Deadline: July 5, 2015
$90.00Saskatoon
CRN: 201502-270October 26, 2015
Mon - 8:00-11:59 am
Registration opens July 2, 2015
Registration Deadline: October 22, 2015
$90.00Saskatoon
CRN: 201503-256March 7, 2016
Mon - 8:00-11:59 am
Registration opens July 2, 2015
Registration Deadline: March 3, 2016
$90.00Saskatoon
CRN: 201503-931April 7, 2016
Thu - 8:00-11:59 am
Registration opens July 2, 2015
Registration Deadline: March 31, 2016
$90.00Saskatoon
CRN: 201502-545September 14, 2015
Mon - 8:00-11:59 am
Registration opens July 2, 2015
Registration Deadline: September 13, 2015
$90.00Regina
CRN: 201501-52August 10, 2015
Mon - 8:00-11:59 am
Registration opens July 2, 2015
Registration Deadline: August 9, 2015
$90.00Prince Albert
CRN: 201502-547October 5, 2015
Mon - 8:00-11:59 am
Registration opens July 2, 2015
Registration Deadline: October 4, 2015
$90.00Moose Jaw
This course provides an overall introduction to the safe use of Aerial Work Platforms. Legislation, types of aerial lifts, hazard and controls, safe work practices, and other safety precautions are examined.

Prerequisites: General Fall Protection


CRNStart and End DatesFeeLocation
CRN: 201502-590November 9, 2015 - November 10, 2015
Mon, Tue - 8:00 am-4:59 pm
Registration opens July 2, 2015
Registration Deadline: November 8, 2015
$400.00Saskatoon
CRN: 201502-592September 24, 2015 - September 25, 2015
Thu, Fri - 8:00 am-4:59 pm
Registration opens July 2, 2015
Registration Deadline: September 23, 2015
$400.00Regina
CRN: 201502-591December 7, 2015 - December 8, 2015
Mon, Tue - 8:00 am-4:59 pm
Registration opens July 2, 2015
Registration Deadline: December 6, 2015
$400.00Prince Albert
CRN: 201502-593October 15, 2015 - October 16, 2015
Thu, Fri - 8:00 am-4:59 pm
Registration opens July 2, 2015
Registration Deadline: October 14, 2015
$400.00Moose Jaw
This comprehensive course provides a thorough background in rigging focusing on legislative requirements; workplace hazards and controls; rigging equipment and techniques; signaling; rope and equipment inspection; calculating rigging loads; and maintenance and storage of equipment.

CRNStart and End DatesFeeLocation
CRN: 201501-61July 20, 2015 - July 21, 2015
Mon, Tue - 8:00 am-4:59 pm
Registration opens July 2, 2015
Registration Deadline: July 19, 2015
$500.00Saskatoon
CRN: 201502-575September 8, 2015 - September 9, 2015
Tue, Wed - 8:00 am-4:59 pm
Registration opens July 2, 2015
Registration Deadline: September 7, 2015
$500.00Regina
CRN: 201501-62August 24, 2015 - August 25, 2015
Mon, Tue - 8:00 am-4:59 pm
Registration opens July 2, 2015
Registration Deadline: August 23, 2015
$500.00Prince Albert
CRN: 201502-576October 19, 2015 - October 20, 2015
Mon, Tue - 8:00 am-4:59 pm
Registration opens July 2, 2015
Registration Deadline: October 18, 2015
$500.00Moose Jaw
This course provides an overview of safe work practices when handling compressed gas and cylinders. It examines compressed gas/cylinder identification, safety devices, ventilation, safe transportation, storage, safe use in confined spaces, and safe handling procedures.

CRNStart and End DatesFeeLocation
CRN: 201502-585November 7, 2015
Sat - 1:00-4:59 pm
Registration opens July 2, 2015
Registration Deadline: November 6, 2015
$110.00Saskatoon
CRN: 201502-587September 26, 2015
Sat - 1:00-4:59 pm
Registration opens July 2, 2015
Registration Deadline: September 25, 2015
$110.00Regina
CRN: 201502-586December 5, 2015
Sat - 1:00-4:59 pm
Registration opens July 2, 2015
Registration Deadline: December 4, 2015
$110.00Prince Albert
CRN: 201502-588October 17, 2015
Sat - 1:00-4:59 pm
Registration opens July 2, 2015
Registration Deadline: October 16, 2015
$110.00Moose Jaw
CRN: 201509-148September 1, 2015 - June 17, 2016
Registration opens July 2, 2015
Registration Deadline: June 12, 2016
$110.00Online
This course provides an overview of confined spaces and the importance of planning an entry. Topics include legislative requirements, identifying hazards and controls, atmospheric testing, emergency response plans, signage and tagging, and filling out a confined space entry plan.

CRNStart and End DatesFeeLocation
CRN: 201501-58July 13, 2015
Mon - 8:00 am-4:59 pm
Registration opens July 2, 2015
Registration Deadline: July 12, 2015
$210.00Saskatoon
CRN: 201502-565September 21, 2015
Mon - 8:00 am-4:59 pm
Registration opens July 2, 2015
Registration Deadline: September 20, 2015
$210.00Regina
CRN: 201501-59August 17, 2015
Mon - 8:00 am-4:59 pm
Registration opens July 2, 2015
Registration Deadline: August 16, 2015
$210.00Prince Albert
CRN: 201502-566October 14, 2015
Wed - 8:00 am-4:59 pm
Registration opens July 2, 2015
Registration Deadline: October 13, 2015
$210.00Moose Jaw
This course provides an overview of fall protection including legislative requirements, specific fall arrest terminology, types of fall protection equipment and use, determining when fall protection is required, hazards associated with working at heights, and how to complete a fall protection work-entry plan. Participants can expect to briefly suspended in a harness.

CRNStart and End DatesFeeLocation
CRN: 201501-55July 11, 2015
Sat - 8:00 am-4:59 pm
Registration opens July 2, 2015
Registration Deadline: July 10, 2015
$210.00Saskatoon
CRN: 201502-563September 19, 2015
Sat - 8:00 am-4:59 pm
Registration opens July 2, 2015
Registration Deadline: September 18, 2015
$210.00Regina
CRN: 201501-57August 15, 2015
Sat - 8:00 am-4:59 pm
Registration opens July 2, 2015
Registration Deadline: August 14, 2015
$210.00Prince Albert
CRN: 201502-564October 13, 2015
Tue - 8:00 am-4:59 pm
Registration opens July 2, 2015
Registration Deadline: October 12, 2015
$210.00Moose Jaw
This course provides a general overview of mine safety and offers an introduction to: personal protective equipment; safe use of hand and power tools; safe use of scaffolding and ladders; controlled energy safety; environmental awareness and spill reporting; hazard identification and control; reporting incidents; Saskatchewan Mining Regulations & Saskatchewan Employment Act; ground control awareness and safe work practices; self-rescue techniques; asbestos awareness; and fit for duty and drug testing.

Prerequisites: WHMIS 1988, WHMIS 1800 or an equivalent recognized course is a pre-requisite or co-requisite for SFTY 1808.


CRNStart and End DatesFeeLocation
CRN: 201404-1276May 2, 2015 - May 10, 2015
Sun, Sat - 8:00 am-4:59 pm
Registration Deadline: May 1, 2015
Register Online
$399.00Saskatoon
CRN: 201501-54July 7, 2015 - July 10, 2015
Tue, Wed, Thu, Fri - 8:00 am-4:59 pm
Registration opens July 2, 2015
Registration Deadline: July 6, 2015
$399.00Saskatoon
CRN: 201502-560September 15, 2015 - September 18, 2015
Tue, Wed, Thu, Fri - 8:00 am-4:59 pm
Registration opens July 2, 2015
Registration Deadline: September 14, 2015
$399.00Regina
CRN: 201501-56August 11, 2015 - August 14, 2015
Tue, Wed, Thu, Fri - 8:00 am-4:59 pm
Registration opens July 2, 2015
Registration Deadline: August 10, 2015
$399.00Prince Albert
CRN: 201502-562October 6, 2015 - October 9, 2015
Tue, Wed, Thu, Fri - 8:00 am-4:59 pm
Registration opens July 2, 2015
Registration Deadline: October 5, 2015
$399.00Moose Jaw
CRN: 201501-53July 1, 2015 - June 17, 2016
Registration opens July 2, 2015
Registration Deadline: June 12, 2016
$399.00Online
CRN: 201403-4895April 1, 2015 - June 5, 2015
Registration Deadline: June 1, 2015
Register Online
$399.00Online
This comprehensive course provides a thorough background in ground disturbance. It examines pre-job planning strategies, searching the disturbance area, notification requirements, locating and marking, hand and mechanical exposure guidelines, and post-inspection requirements.

CRNStart and End DatesFeeLocation
CRN: 201502-646November 5, 2015
Thu - 8:00 am-4:59 pm
Registration opens July 2, 2015
Registration Deadline: November 4, 2015
$210.00Saskatoon
CRN: 201502-655September 23, 2015
Wed - 8:00 am-4:59 pm
Registration opens July 2, 2015
Registration Deadline: September 22, 2015
$210.00Regina
CRN: 201502-647December 3, 2015
Thu - 8:00 am-4:59 pm
Registration opens July 2, 2015
Registration Deadline: December 2, 2015
$210.00Prince Albert
CRN: 201502-656October 2, 2015
Fri - 8:00 am-4:59 pm
Registration opens July 2, 2015
Registration Deadline: September 18, 2015
$210.00Moose Jaw
CRN: 201509-177September 1, 2015 - June 17, 2016
Registration opens July 2, 2015
Registration Deadline: June 12, 2016
$210.00Online
This course provides an introduction on how to investigate incidents in order to prevent reoccurrence. The basics of investigations are covered including outlining legislative requirements, interviewing witnesses, collecting and analyzing evidence, and writing reports.

CRNStart and End DatesFeeLocation
CRN: 201502-580November 6, 2015
Fri - 8:00 am-4:59 pm
Registration opens July 2, 2015
Registration Deadline: November 5, 2015
$210.00Saskatoon
CRN: 201502-583September 22, 2015
Tue - 8:00 am-4:59 pm
Registration opens July 2, 2015
Registration Deadline: September 21, 2015
$210.00Regina
CRN: 201502-581December 4, 2015
Fri - 8:00 am-4:59 pm
Registration opens July 2, 2015
Registration Deadline: December 3, 2015
$210.00Prince Albert
CRN: 201502-584October 23, 2015
Fri - 8:00 am-4:59 pm
Registration opens July 2, 2015
Registration Deadline: October 22, 2015
$210.00Moose Jaw
CRN: 201509-147September 1, 2015 - June 17, 2016
Registration opens July 2, 2015
Registration Deadline: June 12, 2016
$210.00Online
This comprehensive 2-day course provides a thorough preparation for safe overhead crane operation focusing on legislative requirements, types of overhead cranes, calculating load estimates, crane capabilities, pre-lift, travel and unloading procedures, identifying and using crane controls, safe operating procedures, and crane maintenance schedules and inspection log-books. Successful completion of the 2-day course SFTY 1815: Basic Hoisting and Rigging Safety is a pre-requisite for this course.

Prerequisites: Basic Hoisting/Rigging Safety


CRNStart and End DatesFeeLocation
CRN: 201501-63July 22, 2015 - July 23, 2015
Wed, Thu - 8:00 am-4:59 pm
Registration opens July 2, 2015
Registration Deadline: July 21, 2015
$500.00Saskatoon
CRN: 201502-578September 10, 2015 - September 11, 2015
Thu, Fri - 8:00 am-4:59 pm
Registration opens July 2, 2015
Registration Deadline: September 9, 2015
$500.00Regina
CRN: 201501-64August 26, 2015 - August 27, 2015
Wed, Thu - 8:00 am-4:59 pm
Registration opens July 2, 2015
Registration Deadline: August 25, 2015
$500.00Prince Albert
CRN: 201502-579October 21, 2015 - October 22, 2015
Wed, Thu - 8:00 am-4:59 pm
Registration opens July 2, 2015
Registration Deadline: October 20, 2015
$500.00Moose Jaw
This in-class course is intended to assist students to prepare to write the Technical Safety Authority of Saskatchewan Limited Power Engineering (Fireman’s Certificate) exam. Topics included: low pressure heat boilers, fuel and firing equipment, automatic controls, pumps, piping fittings, valves, steam and hot water heating, ventilation, basic electricity, and the Boiler Pressure Vessel Act and Regulations. Lab work is conducted to reinforce classroom work. There is a final exam; students receive a final grade from Saskatchewan Polytechnic. Provincial testing is not included – contact the Technical Safety Authority of Saskatchewan (TSASK)(1-866-530-8599) to book an exam sitting.

45 hours/15 sessions Note: Some dates will be rearranged to accommodate labs

Additional Costs: Textbooks approx $340, Steel toes boots and safety glasses required for lab work.
CRNStart and End DatesFeeLocation
CRN: 201502-726October 20, 2015 - December 8, 2015
Tue, Thu - 7:00-9:59 pm
Registration opens July 2, 2015
Registration Deadline: October 20, 2015
$615.00Saskatoon
CRN: 201503-749February 16, 2016 - April 5, 2016
Tue, Thu - 7:00-9:59 pm
Registration opens July 2, 2015
Registration Deadline: February 16, 2016
$615.00Saskatoon
CRN: 201502-600September 29, 2015 - November 17, 2015
Tue, Thu - 7:00-10:00 pm
Room: 119.5
Registration opens July 2, 2015
Registration Deadline: September 22, 2015
$615.00Regina
CRN: 201503-580January 12, 2016 - April 19, 2016
Tue - 7:00-10:00 pm
Registration opens July 2, 2015
Registration Deadline: January 5, 2016
$615.00Regina

The 200 hour 4th Class Power Lab is for students who have completed an approved "4th Class Power Engineering Theory Course" but do not have qualifying work experience towards the 4th Class TSASK certificate. Upon completion students will have the necessary experience to earn 6 month's qualifying time credit from TSASK.

Attendance is mandatory.

Topics include: Plant Safety, Piping & Valves, High Pressure and Heating Boiler Design & Operation, Parts & Fittings, Feedwater Testing & Treatment, Prime Movers, Pumps & Compressors, Electrical Controls & Instrumentation, Heating Systems, Compression Refrigeration and Boiler Mainenance.

CSA approved footwear and safety glasses are required.

July 6, 2015 – July 31, 2015
Mon, Tue, Wed, Thu, Fri - 7:00 am-6:00 pm
Room: S115
Registration Deadline: July 6, 2015
$4,250
Saskatoon



CRN 201501-3
Students may register for this section by phone, in person or by mail effective immediately. However, online registration is NOT available.
Registration by phone: 1-866-467-4278
Register by mail: saskpolytech.ca/admissions/resources/documents/Continuing-Education-Course-Registration-Form.pdf

Prerequisites:

(required upon registration)
Deadline for submitting pre-req documents June 8, 2015
Proof of successful completion of an approved 4th Class Power Engineering Theory course, or
- Proof of attainment of 4th Class Part A & B government exam papers

SAIT, NAIT & BCIT’s 4th Class Power Engineering Correspondence Theory courses are approved and can be used as the pre-requisite.

Candidates with other than these courses who feel they have training that should be considered should contact the Power Engineering Technology program at Saskatchewan Polytechnic, Saskatoon Campus by email les.gulka@saskpolytech.ca or phone 306-659-4234.

OUT OF PROVINCE STUDENTS please check with your local boilers branch to ensure the course meets steam time requirements.


(GST included), 200 hours, Course Materials – approx. $35.00
CRNStart and End DatesFeeLocation
CRN: 201501-3July 6, 2015 - July 31, 2015
Mon, Tue, Wed, Thu, Fri - 7:00 am-6:00 pm
Registration Deadline: July 6, 2015
$4,250.00Saskatoon
This course covers 2nd Class Part A Paper 1 SOPEEC syllabus topics including ASME Sections 1 & 8 Code Calculations - vessel component thickness, reinforcement compensation of openings and firetube boiler components and stays, Industrial Administration - management principles including maintenance and safety and Applied Mechanics. Students will be prepared to challenge the SOPEEC certification exam in their jurisdiction. The short time allotment (90 hours) requires students to be familiar with all topic areas prior to the course start date. Emphasis will be placed on typical exam question answering techniques. Student should expect 2 hours of after class work each day.

CRNStart and End DatesFeeLocation
CRN: 201502-607November 2, 2015 - November 20, 2015
Mon, Tue, Wed, Thu, Fri - 8:00 am-2:59 pm
Registration opens July 2, 2015
Registration Deadline: November 1, 2015
$1,200.00Saskatoon
CRN: 201504-74May 2, 2016 - May 20, 2016
Mon, Tue, Wed, Thu, Fri, Sat - 8:00 am-2:59 pm
Registration opens July 2, 2015
Registration Deadline: May 1, 2016
$1,200.00Saskatoon
This course covers 2nd Class Part A Paper 2 SOPEEC syllabus topics including Thermodynamics - Gas Laws, Thermal expansion of solids, liquids and gases, Entropy, Practical cycles and Energy flow calculations. Metallurgy - material properties, composition, treatments and uses and corrosion principles and control methods. Testing of Materials - destructive and NDE methods. Students will be prepared to challenge the SOPEEC certification exam in their jurisdiction. The short time allotment (60 hours) requires students to be familiar with all topic areas prior to the course start date. Emphasis will be placed on typical exam question answering techniques. Students should expect 2 hours of after class work each day.

CRNStart and End DatesFeeLocation
CRN: 201502-608November 23, 2015 - December 4, 2015
Mon, Tue, Wed, Thu, Fri - 8:00 am-2:59 pm
Registration opens July 2, 2015
Registration Deadline: November 22, 2015
$1,200.00Saskatoon
CRN: 201504-75May 30, 2016 - June 10, 2016
Mon, Tue, Wed, Thu, Fri - 8:00 am-2:59 pm
Registration opens July 2, 2015
Registration Deadline: May 29, 2016
$1,200.00Saskatoon
This course covers 2nd Class Part A Paper 3 SOPEEC syllabus topics including Boiler design, operation, maintenance and inspection, Pumps and Water Treatment - Internal, External, Cooling water and Wastewater. Students will be prepared to challenge the SOPEEC certification exam in their jurisdiction. The short time allotment (60 hours) requires students to be familiar with all topic areas prior to the course start date. Emphasis will be placed on typical exam question answering techniques. Students should expect 2 hours of after class work each day.

CRNStart and End DatesFeeLocation
CRN: 201502-609December 7, 2015 - December 18, 2015
Mon, Tue, Wed, Thu, Fri - 8:00 am-2:59 pm
Registration opens July 2, 2015
Registration Deadline: December 6, 2015
$1,200.00Saskatoon
This course covers 2nd Class Part B Paper 1 SOPEEC syllabus topics including Prime Movers - Steam and Gas Turbines, Internal Combustion Engines, Lubrication, Piping and Mechanical Drawing. Students will be prepared to challenge the SOPEEC certification exam in their jurisdiction. The short time allotment (60 hours) requires students to be familiar with all topic areas prior to the course start date. Emphasis will be placed on typical exam question answering techniques. Drawing activities to build skills needed for the mandatory drawing question requires each student to have a drafting kit available. Students should expect 2 hours of after class work each day.

CRNStart and End DatesFeeLocation
CRN: 201502-610September 14, 2015 - September 25, 2015
Mon, Tue, Wed, Thu, Fri - 8:00 am-2:59 pm
Registration opens July 2, 2015
Registration Deadline: September 13, 2015
$1,200.00Saskatoon
This course covers 2nd Class Part B Paper 2 SOPEEC syllabus topics including Plant Systems, Instrumentation, Fuels and Combustion and Environmental Protection. Students will be prepared to challenge the SOPEEC certification exam in their jurisdiction. The short time allotment (60 hours) requires students to be familiar with all topic areas prior to the course start date. Emphasis will be placed on typical exam question answering techniques. Students should expect 2 hours of after class work each day.

CRNStart and End DatesFeeLocation
CRN: 201502-611September 28, 2015 - October 9, 2015
Mon, Tue, Wed, Thu, Fri - 8:00 am-2:59 pm
Registration opens July 2, 2015
Registration Deadline: September 27, 2015
$1,200.00Saskatoon
This course covers 2nd Class Part B Paper 3 SOPEEC syllabus topics including Electrotechnology - AC Theory, AC and DC Machines, Air and Gas Compression and Refrigeration - systems, plants, equipment, operation, safety and computations. Students will be prepared to challenge the SOPEEC certification exam in their jurisdiction. The short time allotment (90 hours) requires students to be familiar with all topic areas prior to the course start date. Emphasis will be placed on typical exam question answering techniques. Students should expect 2 hours of after class work each day.

CRNStart and End DatesFeeLocation
CRN: 201502-612October 13, 2015 - October 30, 2015
Mon, Tue, Wed, Thu, Fri - 8:00 am-2:59 pm
Registration opens July 2, 2015
Registration Deadline: October 12, 2015
$1,200.00Saskatoon
This course covers 3rd Class Part A Paper 1 SOPEEC syllabus topics including Math, Mechanics, Thermodynamics, Chemistry, Metallurgy and Industrial Drawings. Students will be prepared to challenge the SOPEEC certification exam in their jurisdiction. The short time allotment (90 hours) requires students to be familiar with all topic areas prior to the course start date. Emphasis will be placed on typical exam question answering techniques. Students should expect 2 hours of after class work each day.

CRNStart and End DatesFeeLocation
CRN: 201503-596January 11, 2016 - January 29, 2016
Mon, Tue, Wed, Thu, Fri - 8:00 am-2:59 pm
Registration opens July 2, 2015
Registration Deadline: January 10, 2016
$1,200.00Saskatoon
This course covers 3rd Class Part A Paper 2 SOPEEC syllabus topics including Prime Movers - Steam and Gas Turbines, Internal Combustion Engines, Cogeneration, Compressors, Refrigeration, Wastewater Treatment, Plant Maintenance and Administration. Students will be prepared to challenge the SOPEEC certification exam in their jurisdiction. The short time allotment (90 hours) requires students to be familiar with all topic areas prior to the course start date. Emphasis will be placed on typical exam question answering techniques. Students should expect 2 hours of after class work each day.

CRNStart and End DatesFeeLocation
CRN: 201503-597February 1, 2016 - February 19, 2016
Mon, Tue, Wed, Thu, Fri - 8:00 am-2:59 pm
Registration opens July 2, 2015
Registration Deadline: March 30, 2016
$1,200.00Saskatoon
This course covers 3rd Class Part B Paper 1 SOPEEC syllabus topics including Boilers - classification, components, operation, control, Feedwater Treatment, Pumps, Welding and Pressure Vessels. Students will be prepared to challenge the SOPEEC certification exam in their jurisdiction. The short time allotment (90 hours) requires students to be familiar with all topic areas prior to the course start date. Emphasis will be placed on typical exam question answering techniques. Students should expect 2 hours of after class work each day.

CRNStart and End DatesFeeLocation
CRN: 201503-598March 7, 2016 - March 24, 2016
Mon, Tue, Wed, Thu, Fri - 8:00 am-2:59 pm
Registration opens July 2, 2015
Registration Deadline: March 6, 2016
$1,200.00Saskatoon
This course covers 3rd Class Part B Paper 2 SOPEEC syllabus topics including Prime Movers - Steam and Gas Turbines, Internal Combustion Engines, Cogeneration, Compressors, Refrigeration, Wastewater Treatment, Plant Maintenance and Administration. Students will be prepared to challenge the SOPEEC certification exam in their jurisdiction. The short time allotment (90 hours) requires students to be familiar with all topic areas prior to the course start date. Emphasis will be placed on typical exam question answering techniques. Students should expect 2 hours of after class work each day.

CRNStart and End DatesFeeLocation
CRN: 201503-599April 4, 2016 - April 22, 2016
Mon, Tue, Wed, Thu, Fri - 8:00 am-2:59 pm
Registration opens July 2, 2015
Registration Deadline: April 3, 2016
$1,200.00Saskatoon
You will learn the major components of a steam plant, participate in the start up of the equipment which is similar to that used in industry, learn about and practice the various types of maintenance required to keep plant equipment functioning in a safe workplace. You will also perform water testing and chemical treatment. You will be introduced to the operation of computer controlled systems used to operate plant equipment. Space is limited. To increase your chances of obtaining a seat in the ENGP 1802 Power Lab 1 course, please register by calling 306-659-4800 at 8:00 am, on or after July 2, 2014.

CSA approved footwear and safety glasses required

Prerequisites: Pre-requisite: Successful completion of Sask. Government 4th Class Power Engineering Part A exam OR successful completion of Part A of a correspondence course, as of the first day of classes. Questions should be directed to Les Gulka, 659-4234


(GST included), 90 hours , Additional costs: Manuals (approx $20)
CRNStart and End DatesFeeLocation
CRN: 201502-728October 5, 2015 - October 23, 2015
Mon, Tue, Wed, Thu, Fri - 3:00-9:30 pm
Registration opens July 2, 2015
Registration Deadline: October 5, 2015
$1,430.00Saskatoon
CRN: 201502-727November 2, 2015 - November 20, 2015
Mon, Tue, Wed, Thu, Fri - 3:00-9:30 pm
Registration opens July 2, 2015
Registration Deadline: November 2, 2015
$1,430.00Saskatoon
CRN: 201404-1252May 11, 2015 - May 29, 2015
Mon, Tue, Wed, Thu, Fri - 3:00-9:30 pm
Registration Deadline: May 11, 2015
Register Online
$1,375.00Regina
You will manipulate steam production with the purpose of operating turbines, heat exchangers, pumps and auxiliary fuel systems in a functioning high pressure steam lab. The lab will allow you to bring all of your previously learned theory and skills from 4th Class Power Engineering Power Lab 1 together in order to validate your knowledge and operating skills. You will receive hands-on training on plant maintenance tasks (including the construction of piping systems and shaft alignment. You will have the opportunity to run a piping system using simulation. Completion of Power Labs 1 & 2 earns you 6 months qualifying time credit towards your 4th class TSASK certification. Space is limited. To increase your chances of obtaining a seat in the ENGP 1803 Power Lab 2 course, please register by calling 306-659-4800 at 8:00 am, on or after July 2, 2014.

CSA approved footwear and safety glasses required.

Prerequisites: Power Engineering 4th Class /Power Lab 1, Pre-requisite: Power Lab 1 and successful completion of the 4th Class Power Engineering Part B exam OR successful completion of Part B or a correspondence course, as of the first day of classes. Questions should be directed to Les Gulka, 659-4234


(GST included), 90 hours Additional cost: Manuals (approx $20)
CRNStart and End DatesFeeLocation
CRN: 201503-750February 1, 2016 - February 19, 2016
Mon, Tue, Wed, Thu, Fri - 3:00-9:29 pm
Registration opens July 2, 2015
Registration Deadline: February 1, 2016
$1,430.00Saskatoon
CRN: 201503-751March 7, 2016 - March 24, 2016
Mon, Tue, Wed, Thu, Fri - 3:00-9:29 pm
Registration opens July 2, 2015
Registration Deadline: March 7, 2016
$1,430.00Saskatoon
This course provides an overview of respiratory protection and fit testing procedures. It specifically addresses OH & S legislation; inhalation hazards and how to select appropriate respiratory protection; different types of respirators; the use, care and maintenance of respirators; and general fit testing procedures.

CRNStart and End DatesFeeLocation
CRN: 201501-74July 6, 2015
Mon - 1:00-4:59 pm
Registration opens July 2, 2015
Registration Deadline: July 5, 2015
$110.00Saskatoon
CRN: 201502-618September 14, 2015
Mon - 1:00-4:59 pm
Registration opens July 2, 2015
Registration Deadline: September 13, 2015
$110.00Regina
CRN: 201501-75August 10, 2015
Mon - 1:00-4:59 pm
Registration opens July 2, 2015
Registration Deadline: August 9, 2015
$110.00Prince Albert
CRN: 201502-619October 5, 2015
Mon - 1:00-4:59 pm
Registration opens July 2, 2015
Registration Deadline: October 4, 2015
$110.00Moose Jaw
CRN: 201509-172July 1, 2015 - June 17, 2016
Registration opens July 2, 2015
Registration Deadline: June 12, 2016
$110.00Online
If you presently hold a Fireman’s Certificate and want to prepare for the Technical Safety Authority of Saskatchewan exam, this course is for you. Following the Panglobal Manual, you will learn about low-pressure heating, refrigeration and air conditioning systems in large buildings.

51 hours/17, 8.5 weeks Additional costs: Books
CRNStart and End DatesFeeLocation
CRN: 201502-605September 29, 2015 - November 24, 2015
Tue, Thu - 7:00-10:00 pm
Registration opens July 2, 2015
Registration Deadline: September 22, 2015
$680.00Regina
CRN: 201503-581January 12, 2016 - May 3, 2016
Tue - 7:00-10:00 pm
Registration opens July 2, 2015
Registration Deadline: January 5, 2016
$680.00Regina
Consider this course if you want to upgrade your knowledge and/or certification to the Fourth Class Power Engineering level. Due to the amount of subject material to be covered, you should be prepared to set aside sufficient time for home study.

60 hours/20 weeks Additional costs: Books
CRNStart and End DatesFeeLocation
CRN: 201503-582January 6, 2016 - May 18, 2016
Wed - 7:00-10:00 pm
Registration opens July 2, 2015
Registration Deadline: December 30, 2015
$760.00Regina
Learn how to become a motivated and competent trainer to make your training programs effective. Examine learning theory to ensure that adult education principles are applied throughout. Learn how to develop learning outcomes and how to design a course and evaluate learners. Develop techniques for communicating with learners while keeping your audience engaged. Practice your skills in a training session that you will design and deliver for instructor feedback.

CRNStart and End DatesFeeLocation
CRN: 201404-1385May 11, 2015 - May 15, 2015
Mon, Tue, Wed, Thu - 8:00 am-4:59 pm
Registration Deadline: May 11, 2015
Register Online
$999.00Saskatoon
CRN: 201404-1386June 15, 2015 - June 18, 2015
Mon, Tue, Wed, Thu - 8:00 am-4:59 pm
Registration Deadline: June 15, 2015
Register Online
$999.00Saskatoon
CRN: 201501-76July 13, 2015 - July 16, 2015
Mon, Tue, Wed, Thu - 8:00 am-4:59 pm
Registration opens July 2, 2015
Registration Deadline: July 12, 2015
$999.00Saskatoon
CRN: 201501-77August 17, 2015 - August 20, 2015
Mon, Tue, Wed, Thu - 8:00 am-4:59 pm
Registration opens July 2, 2015
Registration Deadline: August 16, 2015
$999.00Saskatoon
CRN: 201502-623September 21, 2015 - September 24, 2015
Mon, Tue, Wed, Thu - 9:00 am-4:00 pm
Room: 241
Registration opens July 2, 2015
Registration Deadline: September 20, 2015
$999.00Regina
CRN: 201503-612February 29, 2016 - March 3, 2016
Mon, Tue, Wed, Thu - 9:00 am-4:00 pm
Room: 241
Registration opens July 2, 2015
Registration Deadline: February 28, 2016
$999.00Regina
CRN: 201504-77May 9, 2016 - May 12, 2016
Mon, Tue, Wed, Thu - 9:00 am-4:00 pm
Room: 241
Registration opens July 2, 2015
Registration Deadline: May 8, 2016
$999.00Regina
Participants will be provided with basic instruction in the process of SMAW (Stick), GMAW (MIG), GTAW (TIG) and Oxy-acetylene welding and then pursue the option of their choice. All students require protective clothing.

This course will be delivered in Moose Jaw and Prince Albert when the minimum number of students has been reached. To place your name on the interest list or obtain more information, call 306-691-8263 in Moose Jaw or 306-765-1564 in Prince Albert You will be contacted to arrange dates and times when the interest list has a sufficient number of people. Please bring proper eye protection, work gloves and work boots

(Regina), $510.30 (Saskatoon), TBD (Woodland), 48 hours/8 weeks
CRNStart and End DatesFeeLocation
CRN: 201502-735October 19, 2015 - December 14, 2015
Mon, Wed - 7:00-9:59 pm
Room: S113
Registration opens July 2, 2015
Registration Deadline: October 19, 2015
$680.00Saskatoon
CRN: 201503-757January 11, 2016 - March 7, 2016
Mon, Wed - 7:00-9:59 pm
Room: S113
Registration opens July 2, 2015
Registration Deadline: January 11, 2016
$680.00Saskatoon
CRN: 201503-756March 14, 2016 - May 9, 2016
Mon, Wed - 7:00-9:59 pm
Room: S113
Registration opens July 2, 2015
Registration Deadline: March 14, 2016
$680.00Saskatoon
CRN: 201502-668October 20, 2015 - December 10, 2015
Tue, Thu - 7:00-8:00 pm
Room: A142
Registration opens July 2, 2015
Registration Deadline: October 13, 2015
$680.00Regina
CRN: 201503-649January 12, 2016 - March 3, 2016
Tue, Thu - 7:00-8:00 pm
Room: A142
Registration opens July 2, 2015
Registration Deadline: January 5, 2016
$680.00Regina
CRN: 201503-648April 12, 2016 - June 2, 2016
Tue, Thu - 7:00-8:00 pm
Room: A142
Registration opens July 2, 2015
Registration Deadline: April 5, 2016
$680.00Regina
Canada has aligned the Workplace Hazardous Materials Information System (WHMIS) with the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) for WHMIS 2015 legislation. This course addresses the WHMIS 2015 education requirements for workers to understand the hazards, and know how to work safely with hazardous products. The current education and training requirements that fall under the WHMIS related occupational health and safety regulations for Saskatchewan are also addressed in this course. Note: Employers are still responsible to provide workers with site-and-job-specific training and information.

CRNStart and End DatesFeeLocation
CRN: 201403-4961April 1, 2015 - June 1, 2015
Registration Deadline: June 1, 2015
Register Online
$90.00Online

©